High electrical efficiency
Electrical efficiency up to 70% helps reduce fuel consumption in demanding marine operations.
The Genevos X-to-Power Marine Platform combines solid oxide fuel cell technology (SOFC) with a modular architecture for vessel propulsion and auxiliary power.
With electrical efficiency up to 70%, the XPM offers a highly efficient approach to marine power generation.
Built around 500 kW systems scalable to multi-megawatt installations, the platform addresses the requirements of energy-intensive vessels, including offshore vessels, cargo ships, ferries and cruise ships.

Electrical efficiency up to 70% helps reduce fuel consumption in demanding marine operations.
A platform for LNG, biomethane, methanol and e-fuel pathways, with configurations developed around the intended fuel and operating requirements.
Robust, steel-supported cell technology and rapid dynamic load response support changing onboard power demands.
Modelled LNG fuel savings compared with the reference combustion generator; results depend on operating profile.
Modelled well-to-wake greenhouse gas reductions in the LNG scenarios described below; results depend on reference engine and methane-slip assumptions.
Potential CO₂ capture assessed in technical studies, requiring suitable carbon capture and storage integration.
Maximum electrical efficiency under suitable application and operating conditions.
Targets elimination of NOx, SOx and particulate matter, with avoidance of methane slip and nitrous oxide.
LNG, biomethane, methanol and e-fuel pathways, with configurations tailored to the intended fuel.
Performance figures summarise the modelled comparisons and design targets explained on this page.
The XPM architecture combines five 100 kW fuel cell modules with system power conditioning to form a 500 kW system string.
Multiple system strings can be combined for larger installations. Integrated DC/DC conversion provides electrical isolation and supports connection to the vessel’s electrical network.
The modular arrangement supports installation planning, maintenance access and replacement of individual fuel cell modules.
Five fuel cell modules
System power conditioning
Integrated DC/DC conversion
500 kW system string
Scalable to multi-MW
Genevos’ modelling compares XPM with marine combustion generators across representative operating loads.
Approximate modelled comparisons. Electrical efficiency gains are expressed in percentage points; fuel savings are expressed as percentage reductions.
The comparisons use electrical output relative to the fuel’s lower heating value, without credit for useful heat recovery. SOFC performance is modelled at middle of life, while combustion-generator references use published beginning-of-life performance.
Results depend on load profile, fuel and the reference generator. Genevos can assess the comparison relevant to your vessel.
XPM’s efficiency and avoidance of methane slip and nitrous oxide contribute to lower modelled well-to-wake greenhouse gas emissions.
The analysed LNG scenarios demonstrate the importance of the reference engine and operating conditions:
The platform also targets the elimination of NOx, SOx and particulate matter emissions.
Integrating suitable carbon capture and storage (CCS) technology with XPM offers the potential to substantially reduce residual CO₂ emissions.
Fuel
XPM
Onboard electricity
Capture
97–99%
Potential CO₂ capture assessed in technical studies
Storage
A configuration producing a concentrated CO₂ stream can reduce the volume of gas requiring treatment compared with dilute combustion exhaust. This can support smaller capture equipment and lower energy requirements for CO₂ separation.
The technical studies assess potential CO₂ capture rates of 97–99%. Achieving these rates through integration with XPM would support a pathway towards near-zero emissions.
Combining sustainably sourced bio-LNG with effective carbon capture and permanent storage also offers potential for negative lifecycle emissions.
| Specification | XPM Platform |
|---|---|
| Full name | X-to-Power Marine Platform |
| Technology | Solid oxide fuel cells |
| Maximum electrical efficiency | Up to 70% |
| Targeted average electrical efficiency at nominal power | Above 60% |
| Fuel cell module rated power | 100 kW |
| Recommended nominal module power | 70 kW |
| System string power | 500 kW |
| Modules per system string | Five |
| Installation scale | Scalable to multi-MW |
| Primary LNG configuration | LNG and biomethane |
| Additional fuel pathway | Methanol, including bio-methanol and e-fuels |
| Electrical conversion | Integrated DC/DC conversion |
| Targeted stack operating life | More than 40,000 hours at the recommended nominal operating point |
| Targeted system design life | 30 years, with stack replacement and servicing |
| Module weight | 2,250 kg per 100 kW module |
| Module dimensions, L × W × H | 200 × 120 × 200 cm |
| Carbon capture | Potential for integration with CCS technology |
| Certification support | Project class approval support upon request |
Genevos supports the integration and operation of marine fuel cell systems through specialist engineering studies, commissioning and after-sales services. Our expertise covers system sizing, integration, safety and installation studies, followed by installation support and commissioning. Remote monitoring and service packages provide ongoing support throughout operation.
System sizing, integration, safety and installation studies tailored to your project.
Specialist support for installation and commissioning, working alongside the parties responsible for delivery.
Remote monitoring and service packages to support ongoing operation.
Project class approval support is available upon request. Genevos contributes specialist technical support alongside the parties leading the approval process.
HELENUS is a European research and development project funded by the European Union’s Horizon Europe research and innovation programme.
Through its participation in HELENUS, Genevos will advance the development of the XPM Platform through system engineering, laboratory validation, marine environmental testing and offshore demonstration.
The project supports the development and assessment of SOFC technology for demanding maritime applications.
Read the HELENUS project announcement
It describes the maximum electrical efficiency available under suitable application and operating conditions. It is distinct from average efficiency at nominal operating power.
Yes. The architecture combines 100 kW fuel cell modules into 500 kW system strings, which can be combined for multi-megawatt installations.
LNG, biomethane, methanol and e-fuel pathways. Contact Genevos to discuss the appropriate configuration for your fuel strategy.
Integration with suitable CCS technology offers the potential for substantial CO₂ reductions. Technical studies assess capture rates of 97–99%.
XPM is Genevos’ commercial SOFC platform. HELENUS is a Horizon Europe-funded research and development project through which Genevos will advance the platform’s development.
Share your power requirements, operating profile, preferred fuel and project timetable.